Molnar PWR ADR+ H Beam Forged Connecting Rods
PWR ADR + H-Beam Billet Connecting Rods
Our H-Beam Connecting Rods are made from 4340 billet material, heat treated to increase tensile strength and are shot peened to increase fatigue life. All rods have a wear resistant bronze bushing for long wrist pin life and feature ARP fasteners. All Molnar Technologies connecting rods are finished here in the US at our factory near Grand Rapids Michigan. Sizes are held +/- .0001” which is the tightest tolerances you will find in the racing industry.
Molnar power adder plus connecting rods are not advertised as being for any set horsepower range as there is no simple way to put a horsepower rating on an engine rod as there are many more factors involved in with the stress a rod experiences in a high performance engine. Many places will put a horsepower number up with their rods but it is more of a rough guideline and some marketing thrown in as places know many people will ask for a "hp rating".
These Molnar Technologies PWR ADR Plus™ series rods are specifically engineered for use in very high output engines and are targets to those using superchargers or turbochargers with high boost levels as well as very large nitrous shot engines. There are many factors to consider when choosing a connecting rod for your project engine. In addition to boost or nitrous use and levels details such as the weight of the piston assembly, max rpm, crankshaft stroke length, intended use of the vehicle and more all factor into the required rod parameters.
All Rods Include 3/8 ARP2000 Bolts!
