Massive Speed System Billet High Clearance Intrusion Beams - 2021 + Ford Bronco

$457.11
$457.11
Color Gloss Black Anodize

Description

Going with big tires on your new full size Bronco?  You will promptly realize your going to run into your stock intrusion aka crash beams.  These steel tubular pieces  are designed as a collision safety feature, however they interfere with larger than OEM tires, particularly near full lock turning.  Thankfully, these beams simply bolt on to the chassis and can be easily replaced.   

While gaining this much needed clearance was crucial, we didnt want to sacrifice integritiy, so we machined these ones from a solid block of 6061 Aluminum - lightweight and STRONG!  They also WONT rust like a steel one WILL.  Their solid nature also impedes moisture and salt from gaining access to the inside of the vehicle's frame, unlike stock or other aftermarket versions. 

Adds some visual appeal, available in your choice of anodized colors.  Made in house right here in the USA!  Includes high strength grade 10.9 Zinc and Yellow plated hardware in case your factory stuff is destroyed from road salt or serious wheeling!  We have tested these  bars up to a 35" (285/75/18) tire on an 18x8 wheel with a 4.75 BS ( +6 offset) with NO LIFT.  You can of course expect more clearance once lifted.  Due to the near unlimited combinations of tire size, wheel width and offset, it would be impossible to guarantee fitments on all applications.  1.7" additional fore/aft clearance on front bar, 1.2" on rear.  Due to the placement of this part, it is inherent that it will be struck by all manner of road / off road debris.  Therefore, the finish should be expected to wear over time.

Going with big tires on your new full size Bronco?  You will promptly realize your going to run into your stock intrusion aka crash beams.  These steel tubular pieces  are designed as a collision safety feature, however they interfere with larger than OEM tires, particularly near full lock turning.  Thankfully, these beams simply bolt on to the chassis and can be easily replaced.   

While gaining this much needed clearance was crucial, we didnt want to sacrifice integritiy, so we machined these ones from a solid block of 6061 Aluminum - lightweight and STRONG!  They also WONT rust like a steel one WILL.  Their solid nature also impedes moisture and salt from gaining access to the inside of the vehicle's frame, unlike stock or other aftermarket versions. 

Adds some visual appeal, available in your choice of anodized colors.  Made in house right here in the USA!  Includes high strength grade 10.9 Zinc and Yellow plated hardware in case your factory stuff is destroyed from road salt or serious wheeling!  We have tested these  bars up to a 35" (285/75/18) tire on an 18x8 wheel with a 4.75 BS ( +6 offset) with NO LIFT.  You can of course expect more clearance once lifted.  Due to the near unlimited combinations of tire size, wheel width and offset, it would be impossible to guarantee fitments on all applications.  1.7" additional fore/aft clearance on front bar, 1.2" on rear.  Due to the placement of this part, it is inherent that it will be struck by all manner of road / off road debris.  Therefore, the finish should be expected to wear over time.