Turbo Manifold LTR Cast Stainless Mazda MZR Ford Duratec

$927.00
$927.00
Title

Description

Stock Flange to Flange Geometry (ability to use the stock turbo, if desired)
1.66″ Interior Diameter
Cast 304 Stainless Steel
Ready to Support 700+ Horsepower
Zero Chance of Cracking (weld-less manifold design)
Optional Stock Laser Engraved Turbo Flange
Optional TiAL Stainless Steel Turbo V-Band Flange (~54.8mm opening)
Optional Precision Turbo V-Band Flange
Integrated External Wastegate (can be used immediately or at a later date) (~44mm opening)
Optional 304 Stainless Steel Laser Engraved Block Off Plate with 304 Stainless Steel Clamp
Cast Merge Collector Spike
Equal Length Runners
Relief Cuts in 304 Stainless Steel Head Flange
Fits MZR 2.0, 2.3, 2.5 and 2.3 DISIMazda Vehicles
Diamond Extrusion for Consistency of Internal Finish.
The manifold fits Precision turbo sizes 5558 up to 6766.
We started doing the design work on this manifold in 2007. We first started with extensive CMM data from the stock engine bay area (to determine constraints in the design), and the stock manifold to make sure we could replicate the cylinder head flange exactly. With this data, we knew where we could route the runners, and we were able to keep the stock turbo geometry / placement. With this, if you choose to run our manifold with a stock turbo and internal wastegate, you will be able to with no problems.

Though it has been a long wait for this exhaust manifold, cp-e™ chose the path of producing a casting for its durability and to achieve an equal length manifold at an affordable price. CFD analysis was used to help create this manifold, to make it as efficient as possible. The manifold is very versatile and allows end users to go from a stock turbo to a stock replacement turbo or even to a radical v-band turbo.

ORder:

MCTC'16363 - TiAL V Band Turbo  Flange

MCTC'16364 - Precision V Band Turbo Flange

MCTC'16365 - OEM MazdaSpeed Turbo Flange

    Stock Flange to Flange Geometry (ability to use the stock turbo, if desired)
    1.66″ Interior Diameter
    Cast 304 Stainless Steel
    Ready to Support 700+ Horsepower
    Zero Chance of Cracking (weld-less manifold design)
    Optional Stock Laser Engraved Turbo Flange
    Optional TiAL Stainless Steel Turbo V-Band Flange (~54.8mm opening)
    Optional Precision Turbo V-Band Flange
    Integrated External Wastegate (can be used immediately or at a later date) (~44mm opening)
    Optional 304 Stainless Steel Laser Engraved Block Off Plate with 304 Stainless Steel Clamp
    Cast Merge Collector Spike
    Equal Length Runners
    Relief Cuts in 304 Stainless Steel Head Flange
    Fits MZR 2.0, 2.3, 2.5 and 2.3 DISIMazda Vehicles
    Diamond Extrusion for Consistency of Internal Finish.
    The manifold fits Precision turbo sizes 5558 up to 6766.
    We started doing the design work on this manifold in 2007. We first started with extensive CMM data from the stock engine bay area (to determine constraints in the design), and the stock manifold to make sure we could replicate the cylinder head flange exactly. With this data, we knew where we could route the runners, and we were able to keep the stock turbo geometry / placement. With this, if you choose to run our manifold with a stock turbo and internal wastegate, you will be able to with no problems.

    Though it has been a long wait for this exhaust manifold, cp-e™ chose the path of producing a casting for its durability and to achieve an equal length manifold at an affordable price. CFD analysis was used to help create this manifold, to make it as efficient as possible. The manifold is very versatile and allows end users to go from a stock turbo to a stock replacement turbo or even to a radical v-band turbo.

    ORder:

    MCTC'16363 - TiAL V Band Turbo  Flange

    MCTC'16364 - Precision V Band Turbo Flange

    MCTC'16365 - OEM MazdaSpeed Turbo Flange